TF StageMix - US4.5.1 - App Store

StageMix is an application for the Apple iPad that provides remote control of Yamaha TF digital mixing console functions via a simple, intuitive graphical interface from anywhere within wireless range. The software has been specifically designed to allow engineers to adjust monitor mixes from the performers’ positions on stage, directly controlling mix parameters via the iPad rather than having to rely on verbal directions to a second engineer. The result is better mixes in less time; a huge advantage during high-pressure pre-show setup. Although StageMix is focused on the requirements for adjusting monitor mixes on stage, its range of features is continually expanding, allowing it to be used for a wider variety of remote control functions.

* TF Firmware V1.10 or later is required to use the TF StageMix.

Version History - Added supported for iPadOS 18
- Solved some minor bugs 4.5.1 03/04/2025 TF5, TF3, TF1, and TF-RACK products on different subnets can now be controlled. *
The position of the fader values and CUE buttons in the HOME screen has been altered.
Fixed some minor bugs.

*Level meters do not operate when controlling devices on a different subnet. 4.5.0 03/11/2021 - Modified the UTILITY screen
- Added MUTE3-6 buttons
- Added User Defined Buttons
- Added Recorder
- Added the SEND TO screen
- Added "Copy/Paste" menu displayed by long tap on the destination channel
- Added Fade display to the SCENE screen
- Added Freq/Gain Lock at the EQ screen
- Added switching to User Defined Buttons on the context menu
- Added "CH Copy/Paste with Sends" menu to the context menu on the HOME screen
- Added [SEND SEL]> [CUE] Link to preference
- Added exiting SENDS ON FADER mode by tap the destination channel again
- Fixed some minor bugs 4.0.0 03/28/2019 - Support for iOS11.
- Fixed some minor bugs. 3.5.1 09/19/2017 - This version supports TF series firmware V3.5
- Added the “frame” unit for Delay Time parameter setting in the OUTPUT DELAY effect of FX.
- Added some improvements, and fixed some minor bugs. 3.5.0 06/19/2017 - This version supports TF series firmware V3.01.
- Solved a problem in which, when operating the analog gain (A.Gain) of a channel not set to the Stereo Link function, and if Stereo Link has been set to the channel using the same INPUT jack (TF5:CH1-8 and CH33-40, TF3:CH1-16 and CH25-40, TF1:CH1-16 and CH17-32), the unlinked channel would also link to the corresponding next channel regardless of the input source selection. 3.0.1 11/01/2016 - This version supports TF series firmware V3.0.
- Now supports TF-RACK.
- Added a FX screen.
- Added Stereo Link Setting and Input Source Setting to the INPUT screen.
- Added Custom Faders.
- Now supports a wired connection to a network. (iOS 9.3 and later)
- Added some improvements, and fixed some minor bugs. 3.0.0 09/01/2016 • This version supports TF series firmware V2.5.
• Now supports MATRIX CH.
• Added the DELAY screen to edit the Delay function in the MATRIX CH.
• The SELECT MIXER screen now indicates when the TF Editor and TF StageMix connected to the TF series have reached the maximum number of connected units.
• Added some improvements, and fixed some minor bugs. 2.5.0 05/24/2016 • This version is compatible with the TF series firmware V2.0.
• Added a function for sending signals to the SUB bus from ST IN1/2 or FX RTN 1/2.
• Added a function to display the INPUT source “SLOT.”
• Added a “Scene Store/Edit” function via the TF StageMix.
• Added a “real time analyzer (RTA)” function for use with the internal microphone of an iPad.
• Added an “All MUTE” function on the Utility screen.
• Changed the step of the up and down buttons to allow faders to be set in increments of 0.5dB.
• Solved the problem in which the All MUTE operation on the TF series was not reflected in the TF StageMix.
• Several bug fixes and functional improvements. 2.0.0 01/20/2016 1.1.0 05/11/2015